Favourable shipping conditions
More than 5000 satisfied installers
Expert knowledge and webinars
Hotline +49 89 9041015-00
Hardy Barth cPH1 - 2T22 PV-KIT cable

Hardy Barth cPH1 - 2T22 PV-KIT cable

Prices are only visible for commercial customers once they register.

Available from 22.04.2022

Hardy Barth Wallbox 22 kW with two type 2 cables + key switch including eCB1 for PV-control PV... more
Power: 22 kilowatt
AC phases: 3
Charging port: Cable
Number of charging points: 2
Access control: Key switch
Surplus charging: Yes
Energy meter: MID compliant meter
KfW förderfähig: Yes
BMVI förderfähig: No

Hardy Barth Wallbox 22 kW with two type 2 cables + key switch including eCB1 for PV-control

PV overcharging with an additional Hardy Barth Smart Meter eCB1 measuring point (4176) or third-party Smart Meter (from Kostal, Fronius or SMA)

Hardy Barth develops and produces special solutions for the e-mobility market. The Wallbox has two charging points with 22 kW maximum charge power. By integration of the key switch and the control unit eCB1, you can easily swtich between the modes: 1 = OFF, 2 = Eco-charging and 3 = Fast charging.

The integrated eCB1 takes over the control for the Hardy Barth Wallbox. With this control unit, you can conveniently control the charge current of the Wallbox, regardless of the inverter or storage system installed. The measurement is performed at the network tie points via an additional measuring point. For this purpose, a Smart Meter from a third-party supplier can be used (Kostal, Fronius, SMA or RCT) or Hardy Barth's in-house Smart Meter (eCB1 measuring point). Thus, you can only charge the vehicle with PV energy. 

Product features:

  • 1x 22 kW charge power (3 phases with 32 A)
  • 2x 11 kW charge power
  • DC residual current detection
  • 2x helix cable 4m
  • RS485
  • including Modes key switch
  • including energy meter eCB1 (internal)
  • including MID meter
  • Wall mounting
  • Dimensions: 477x400x164 mm (HxWxD)
  • Weight: 9.0 kg

 

In addition, an RCD / FI type A is required for the installation. The DC detection has already... more

In addition, an RCD / FI type A is required for the installation. The DC detection has already been integrated in the wallbox.


Accessories
Viewed