- Manufacturer: LG Electronics ESS
- Memodo order no.: 7016
Prices are only visible for commercial customers once they register.
|Battery type:||High volt lithium NMC|
|Net capacity:||9,6 kWh|
LG Electronics ESS HOME 2.0 storage system with 10 kWh
The firmware update is automatically activated when the internet connection is available - nothing else needs to be done (recommended).
With the new LG ESS HOME 2.0 series, LG Electronics offers maximum flexibility. The all-in-one system consists of a 3-phase hybrid inverter and a battery storage system. Depending on the application, you can interconnect up to two batteries. With two battery sizes of 10 and 16 kWh, you will always find the right storage capacity. The hybrid inverter has 3-MPP trackers and generates three-phase alternating current. In the event of a power outage, consumers can still be supplied with power by installing the Enwitec switchover device. A 10-year warranty and improved services offer a perfect overall protection of the system. LG ESS Home 10 with 10 kWh offers the following advantages:
Sunspec protocol for external communication
The implementation of the Sunspec protocol enables easy identification of third-party devices such as energy management systems in the field of sector coupling for the simultaneous operation of heat (pumps) and e-mobility.
Advantages of ESS HOME 2.0
- Inverter and storage system by a single manufacturer
- Flexible DC design with 3 MPP trackers
- Intelligent energy management system
- Heat pump management
- Backup power capability
- 3 phase inverter with 10 kW
- 3 MPP tracker
- 10 kWh storage capacity
- IP 21 / IP 55 (inverter / battery)
- 10-year warranty
- Total weight: 133 kg
- Inverter dimensions: 450 x 599 x 210 mm (W x H x D)
- Battery dimensions: 504 x 816 x 295 mm (W x H x D)
The package includes:
- ESS Home 10
- LG ESS Home HBP 10H battery (LG HBP 10H)
Attention: the 3-phase sensor must be added separately. If you use an Enwitec switching device, the sensor is already integrated in it.
IMPORTANT for start-up: Please strictly adhere to the switch-on and switch-off sequence (!) to prevent damage to the product.
Backup mode SOC: SOC can be selected in the installer menu by clicking on "Battery". The selected value is kept in reserve for emergency power operations. This energy is then not used in grid operations.