Enwitec switching device Fronius Symo Hybrid / Gen24, including Smart Meter, AT

Emergency power with your Enwitec switching device Fronius Symo Hybrid / Gen24, including Smart Meter, AT

This switching device enables your Fronius Symo Hybrid / Symo Gen24 system to provide a 3-phase backup power supply for specific loads in the event of a power failure. Due to the DC coupling, the modules remain active and can contribute to the supply or storage charging. 

3-pole mains disconnection - the variant with all-pole disconnection can be found here.

If you need a switching device with FRT (this is required by a few grid operators in Austria according to TOR generator type A), you will find this here.

Product benefits:

• Completely ready for connection and approved by Fronius
• 3-pole mains disconnection
• Fronius Smart Meter TS65A-3 is integrated
• Very quiet, hum-free contactor
• Pre-assembled including all cable glands and installation guide
• Design according to the "Fronius Symo Hybrid / Gen24 - Overview" circuit diagram
• Protection type IP65 with transparent door
• Max. continuous power up to 20 kW
• Approved for mains type: only TN-S
• Standard variant for Austria
• Manufacturer’s article number: 10015628

Note: not suitable for Fronius Primo Gen24