Favourable shipping conditions
More than 5000 satisfied installers
Expert knowledge and webinars
Hotline +49 89 9041015-00

Mounting systems

No results were found for the filter!
T-head bolt V2A M10x30
T-head bolt V2A M10x30 Manufacturer: Praetner Order number: 534

Alumero cross connector 2.1
Alumero cross connector 2.1 Manufacturer: Alumero Order number: 474

T-head bolt V2A M8x20 with serrated locknut
T-head bolt V2A M8x20 with serrated locknut Manufacturer: Praetner Order number: 3630

Alumero hanger bolt M10, 200mm
Alumero hanger bolt M10, 200mm Manufacturer: Praetner Order number: 518

BOM Import
Order substructures quickly & easily
More Info

Upload your parts list from K2 Systems or the Alumero design tool, check the products & order with just a few clicks.

Alumero Allen screw M8x35
Alumero Allen screw M8x35 Manufacturer: Alumero Order number: 522
Alumero hanger bolt M12, 300mm
Alumero hanger bolt M12, 300mm Manufacturer: Praetner Order number: 519

Alumero Allen screw M8x30
Alumero Allen screw M8x30 Manufacturer: Praetner Order number: 1411

Alumero Allen screw M8x45
Alumero Allen screw M8x45 Manufacturer: Praetner Order number: 1391

K2 EndCap SingleRail 36
K2 EndCap SingleRail 36 Manufacturer: K2 Systems Type designation: 1004767 Order number: 6076

K2 mounting rail single rail 36 with 3.30m
K2 mounting rail single rail 36 with 3.30m Manufacturer: K2 Systems Type designation: 2003221 Order number: 6082

NEW
K2 mounting rail single rail 36 with 3.65m
K2 mounting rail single rail 36 with 3.65m Manufacturer: K2 Systems Type designation: 2004258 Order number: 10270

K2 Solar Cable Manager
K2 Solar Cable Manager Manufacturer: K2 Systems Type designation: 2002870 Order number: 6045

1 2

There is no solar module without a substructure! The right mounting system is the key component for a perfect support of a photovoltaic system. It is the link between the roof of the house and the modules. In the best case, your substructure will be barely visible but still reliable. To achieve this, you need to plan the construction in advance and calculate the wind and suction loads. Project-specific structural calculations can help you in this process.

Use the design programs to plan the substructure individually.

 
Viewed