Favourable shipping conditions
More than 5000 satisfied installers
Expert knowledge and webinars
Hotline +49 89 9041015-00

Mounting systems

No results were found for the filter!
Substructure package for 10 modules from K2, SingleRail, slanted roofs, 1-layer

Mounting package for 10 modules of K2, SingleRail, pitched roof, 1-ply, silver

Alumero plate head screw 100
Alumero plate head screw 100 Manufacturer: Praetner Type designation: 1509110 / 1000656 / 2004112 / 16598 / 9250280 Order number: 528

Alumero center clamp 2.1 Click black
Alumero center clamp 2.1 Click black Manufacturer: Alumero Order number: 874

We listen to your wishes
New: Schletter now @ Memodo
Discover now

Explore our extensive range, featuring the new and robust 3.55m SoloPro rail - available exclusively in our shop.

Alumero middle clamp 2.1 Click
Alumero middle clamp 2.1 Click Manufacturer: Alumero Order number: 480

Alumero roof hook AL 13, 3-way adjustable
Alumero roof hook AL 13, 3-way adjustable Manufacturer: Alumero Order number: 821

T-head bolt V2A M10x30
T-head bolt V2A M10x30 Manufacturer: Praetner Order number: 534

Alumero hexagon nut M10
Alumero hexagon nut M10 Manufacturer: Praetner Order number: 524

Remaining quantity
Alumero end clamp 2.1 click black
Alumero end clamp 2.1 click black Manufacturer: Alumero Order number: 1928

Mounting PV vertically
K2 facade systems
now in the shop
View the products

ou can find K2 Systems Facade PV products in our shop or on request from your Memodo sales representative.

Alumero roof hook ALS 13, 3-way adjustable
Alumero roof hook ALS 13, 3-way adjustable Manufacturer: Alumero Order number: 1507

Alumero profile connector 37
Alumero profile connector 37 Manufacturer: Alumero Order number: 1352

Alumero cross connector 2.1
Alumero cross connector 2.1 Manufacturer: Alumero Order number: 474

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

There is no solar module without a substructure! The right mounting system is the key component for a perfect support of a photovoltaic system. It is the link between the roof of the house and the modules. In the best case, your substructure will be barely visible but still reliable. To achieve this, you need to plan the construction in advance and calculate the wind and suction loads. Project-specific structural calculations can help you in this process.

Use the design programs to plan the substructure individually.

 
Viewed