Favourable shipping conditions
More than 5000 satisfied installers
Expert knowledge and webinars
Hotline +49 89 9041015-00

Mounting systems

No results were found for the filter!
Alumero center clamp 2.1 Click black
Alumero center clamp 2.1 Click black Manufacturer: Alumero Order number: 874

Alumero middle clamp 2.1 Click
Alumero middle clamp 2.1 Click Manufacturer: Alumero Order number: 480

T-head bolt V2A M10x30
T-head bolt V2A M10x30 Manufacturer: Praetner Order number: 534

Remaining quantity
Alumero end clamp 2.1 click black
Alumero end clamp 2.1 click black Manufacturer: Alumero Order number: 1928

We listen to your wishes
New: Schletter now @ Memodo
Discover now

Explore our extensive range, featuring the new and robust 3.55m SoloPro rail - available exclusively in our shop.

Alumero cross connector 2.1
Alumero cross connector 2.1 Manufacturer: Alumero Order number: 474

Alumero end clamp 2.1 Click
Alumero end clamp 2.1 Click Manufacturer: Alumero Order number: 492
Alumero roof hook beaver tail
Alumero roof hook beaver tail Manufacturer: Alumero Order number: 649

T-head bolt V2A M8x20 with serrated locknut
T-head bolt V2A M8x20 with serrated locknut Manufacturer: Praetner Order number: 3630

Remaining quantity
Alumero end clamp black 35 pre-assembled
Alumero end clamp black 35 pre-assembled Manufacturer: Alumero Order number: 497

Mounting PV vertically
K2 facade systems
now in the shop
View the products

ou can find K2 Systems Facade PV products in our shop or on request from your Memodo sales representative.

Remaining quantity
Alumero end clamp 35 pre-assembled
Alumero end clamp 35 pre-assembled Manufacturer: Alumero Order number: 483

Alumero Allen screw M8x35
Alumero Allen screw M8x35 Manufacturer: Alumero Order number: 522
Alumero end clamp black 32 pre-assembled
Alumero end clamp black 32 pre-assembled Manufacturer: Alumero Order number: 2768

1 2 3 4 5 6 7

There is no solar module without a substructure! The right mounting system is the key component for a perfect support of a photovoltaic system. It is the link between the roof of the house and the modules. In the best case, your substructure will be barely visible but still reliable. To achieve this, you need to plan the construction in advance and calculate the wind and suction loads. Project-specific structural calculations can help you in this process.

Use the design programs to plan the substructure individually.

 
Viewed