Discover the latest: offers, new products, exclusive shop features & more!
Discover the latest: offers, new products, exclusive shop features & more!
Favourable shipping conditions
More than 5000 satisfied installers
Expert knowledge and webinars
Hotline +49 89 9041015-00

Mounting systems

No results were found for the filter!
Alumero center clamp 2.1 Click black
Alumero center clamp 2.1 Click black Manufacturer: Alumero Order number: 874

Alumero middle clamp 2.1 Click
Alumero middle clamp 2.1 Click Manufacturer: Alumero Order number: 480

T-head bolt V2A M10x30
T-head bolt V2A M10x30 Manufacturer: Praetner Order number: 534

Alumero end clamp 2.1 click black
Alumero end clamp 2.1 click black Manufacturer: Alumero Order number: 1928

Mounting PV vertically
K2 facade systems
now in the shop
View the products

You can order the K2 Systems products for PV facade installations from our online shop or by contacting uk@memodo.de.

Alumero cross connector 2.1
Alumero cross connector 2.1 Manufacturer: Alumero Order number: 474

Alumero end clamp 2.1 Click
Alumero end clamp 2.1 Click Manufacturer: Alumero Order number: 492

T-head bolt V2A M8x20 with serrated locknut
T-head bolt V2A M8x20 with serrated locknut Manufacturer: Praetner Order number: 3630

Alumero end clamp black 35 pre-assembled
Alumero end clamp black 35 pre-assembled Manufacturer: Alumero Order number: 497

Remaining quantity
Alumero end clamp 35 pre-assembled
Alumero end clamp 35 pre-assembled Manufacturer: Alumero Order number: 483

BOM Import
Order substructures quickly & easily
More Info

Upload your parts list from K2 Systems or the Alumero design tool, check the products & order with just a few clicks.

Alumero Allen screw M8x35
Alumero Allen screw M8x35 Manufacturer: Alumero Order number: 522
Alumero end clamp black 32 pre-assembled
Alumero end clamp black 32 pre-assembled Manufacturer: Alumero Order number: 2768

Alumero end terminal 32 premounted
Alumero end terminal 32 premounted Manufacturer: Alumero Order number: 3306

1 2

There is no solar module without a substructure! The right mounting system is the key component for a perfect support of a photovoltaic system. It is the link between the roof of the house and the modules. In the best case, your substructure will be barely visible but still reliable. To achieve this, you need to plan the construction in advance and calculate the wind and suction loads. Project-specific structural calculations can help you in this process.

Use the design programs to plan the substructure individually.

 
Viewed