Alumero EasyBRIDGE Tilt trapezoidal sheet metal bridge 2.1 Plus, length 400 mm
| Manufacturer Art. No.: | 802445 |
|---|---|
| Art. Nr.: | 537 |
| Pieces per package unit: |
|
| Type of roof: | Trapezoidal sheet |
Lightweight mounting system for low-slope trapezoidal sheet metal roofs – Alumero EasyBRIDGE Tilt Trapezoidal Sheet Metal Bridge 2.1 Plus, length 400 mm
With the Alumero EasyBRIDGE Tilt Trapezoidal Sheet Bridge 2.1 Plus lightweight mounting system, length 400 mm, the module tilt can be increased by 5–7° (depending on the module arrangement). On roofs with only a slight pitch, this can significantly increase the yield and the self-cleaning effect of the modules. The raised installation results in greater row spacing. The trapezoidal sheet metal lightweight mounting system is based on a reinforced version of the tried-and-tested Alumero trapezoidal sheet metal rail, 400 mm in length. Thanks to special screws, fastening is carried out without pre-drilling and without producing chips – including screws and bonded EPDM seal.
The additional module tilt can only be set at the same angle as the roof pitch.
Product features:
- Mounting rail for trapezoidal sheet metal with guide for the front/rear spacer
- Material: Aluminium and V2A stainless steel
- Includes 4 chip-free self-tapping screws with sealing washers
- Includes EPDM seal, already bonded to the rail
For the guarantee and warranty, Alumero and we at Memodo require that you have your PV system statically planned and approved using the Alumero SolarProTool. We are, of course, happy to assist you with this! You will find the relevant data collection form further down this page. Simply fill it in and send it back to us – we will then prepare a personalised quote for you with all the necessary information.
Sustainable & regionally produced: Alumero relies on metagreen secondary aluminium
- Up to 95% lower energy consumption and up to 80% lower CO₂ emissions compared to primary aluminium – thanks to recycling using the metagreen process.
- High quality: Secondary aluminium alloys are certified (e.g. ISO 14001, ISO 45001, IATF 16949) and meet the highest technical standards.
- Austrian product, manufactured in the EU: short transport routes, high security of supply and fast delivery.
Downloads
-
Matching accessories








