Sungrow EV Charger 22 kW G3, cable
| Type of manufacturer: | AC22E-D G3 (Kabel) |
|---|---|
| Manufacturer Art. No.: | A0CH1267 |
| Art. Nr.: | 16355 |
| Pieces per package unit: |
|
| Power: | 22 kilowatt |
| Number of charging points: | 1 |
| Access control: | RFID |
| AC phases: | 3 |
| Surplus charging: | Yes |
| Charging port: | Cable |
| Energy meter: | MID compliant meter |
| Electric charging system: | Private, Wallbox |
- New
Sungrow EV Charger 22 kW G3 – smart Wallbox with a 7 m Type 2 cable
Only compatible with the Sungrow iHomeManager when used in combination with SHxxRT Inverters if the full range of functions is to be utilised (e.g. control in accordance with $14a)
When used with SHxxT inverters, the iHomeManager is essential; up to 3 EV chargers can then be integrated into a single system.
The Sungrow EV Charger AC22E-D G3 is the third generation of the Sungrow Wallbox. It charges electric vehicles at 7, 11 or 22 kW, automatically switches between single-phase and three-phase charging, and utilises surplus PV energy when used in conjunction with Sungrow Inverters and battery storage systems. Thanks to its IP65 protection rating and IK10 impact resistance, it is suitable for indoor and outdoor installation, either on a wall or on a pedestal. The cable version features a permanently attached 7-metre Type 2 charging cable.
Product benefits
- Surplus PV charging and intelligent energy management with Sungrow Inverters and storage systems
- Automatic phase switching (1-phase/3-phase) and adaptive load management (ALM)
- MID-certified energy meter with bidirectional measurement
- Robust: IP65 and IK10 for indoor and outdoor installation
- Compact: 125 × 320 × 205 mm, wall or pole mounting
- Authorisation via Plug & Play, RFID card or app (iSolarCloud / iEnergyCharge)
- Charging modes: Eco, fast charging, time-controlled and customised
- Firmware updates via OTA and real-time status monitoring
- Hardware prepared for ISO 15118 and V2X (Bidirectional charging)
- Set up in around 5 minutes
Technical specifications
- Mains connection: 1/N/PE or 3/N/PE, 230 V ±20 %, 50/60 Hz, TT/TN/IT system
- Max. charging power: 7 / 11 / 22 kW
- Max. charging current: 16 A / 32 A, charging voltage 230 V / 400 V
- Integrated residual current detection: DC 6 mA, AC 30 mA
- Protection functions: overload, overtemperature, PEN fault, earth fault monitoring, flame-retardant housing
- Standby power consumption: 6.5 W
- Charging connection: Type 2 cable, 7 m
- Communication: RS485, Wi-Fi, Bluetooth; optional Ethernet / 4G
- Protocols: OCPP 1.6J and 2.0.1 (coming soon), ISO 15118 and V2X hardware-ready
- RFID: ISO/IEC 14443 A/B, ISO/IEC 15693
- Energy meter: MID, accuracy class A
- Supply cable cross-section: 4–10 mm²
- Dimensions (W × H × D): 125 × 320 × 205 mm
- Protection rating: IP65, impact resistance IK10 (display IK08)
- Operating temperature: −25 °C to +50 °C (reduced performance from 40 °C)
- Humidity: 5–95 per cent, non-condensing; installation altitude up to 3,000 m
- Cooling: natural convection; EMC Class B
- Compliance: CE, CB, MID
