Available from February: JinkoSolar high-voltage storage system. Pre-order now, exclusively @ Memodo!
Available from February: JinkoSolar high-voltage storage system. Pre-order now!
Favourable shipping conditions
More than 5000 satisfied installers
Expert knowledge and webinars
Hotline +49 89 9041015-00
Sungrow Hybrid SH6.0RT – V112
Sungrow Hybrid SH6.0RT – V112

Sungrow Hybrid SH6.0RT – V112

  • Sungrow
  • SH6.0RT
  • ASH00105
  • 8014
  • 6 per pallet

Prices are only visible for commercial customers once they register.

Sungrow Hybrid High Voltage Inverter SH6.0RT with Emergency Output These new three-phase... more
Phases: 3
MPP-Tracker: 2
AC power: 6 kW
MPP voltage range: 200 - 950 Volt
Warranty: 10 Jahre
Communication: RS485, WiFi, Ethernet

Sungrow Hybrid High Voltage Inverter SH6.0RT with Emergency Output

These new three-phase hybrid inverters have a three-phase backup power output with three-phase current with 100% skew load capability. Together with the high voltage battery connection and 2 independent MPP trackers, the Sungrow inverter leaves nothing to be desired. Up to date, this device is configured via iSolarCloudAssistant and sends its data via the already integrated Wi-Fi or Ethernet interfaces to the free iSolarCloud portal or iSolarCloud app. RS485 (Modbus RTU) and Ethernet (Modbus TCP) are available for connecting third-party data loggers. A 3-phase smart meter is already included.

External connections, spacious connection area and an integrated spirit level allow for quick installation.

Version V112 firmware does not currently support the Sungrow EV-Charger and 2CT meter. You should avoid the use of mixed systems consisting of versions V11 & V112. The update for compatibility should be done during Q1 2023!

On a few peak days per year, if PV modules with currents greater than 12.5 A are used, the inverter may regulate down slightly!

Product advantages

  • Input voltage range from 200-950 V
  • High efficiency of up to 98.2%
  • Natural convection
  • AC + DC surge protection 2 integrated
  • External connections, no need to open the inverter
  • Integrated spirit level
  • SG-Ready contact available (for: control e.g. heat pump)
  • Noise emission 30dB (A)

Applications:

  • Operation without battery as solely inverter
  • DC operation with PV and battery 
  • AC operation without PV and with battery

Product features Sungrow Hybrid HV SH6.0RT:

  • Mains connection: 3 phase
  • AC power: 10.0 kVA (10.0 kW nom. / 12 kW 5min. emergency power via separate output)
  • Polarity protection
  • MPP tracker: 2
  • 1 MC4 input per MPPT
  • Battery connection
  • Interfaces: Ethernet
  • Cable cross section AC connection 6 - 10 mm² possible
  • Cable cross section DC connection 4 - 6 mm² possible
  • Dimensions: 540 x 460 x 170 mm (H x W x D)
  • Weight: 27 kg
  • Protection class: IP 65

Scope of delivery

  • Inverter
  • 3-phase Smart Meter Chint DTSU666 80 A included
  • WiNet-S module Wi-Fi adapter
  • Wall mount
  • Expansion dowel set
  • M4 screws and washers
  • AC/Backup connector set
  • Cable end clamp
  • PV connector
  • Crimp contact
  • SUNCLIX connector set
  • LAN connector
  • COM connector
  • RS485 cable
  • OT connector
  • Documents

Battery compability

Energy storage comparison

If you are looking for emergency power, this is it! Compact dimensions and light weight with maximum performance – installed as quickly as no other.

The combination of Sungrow inverters and optimizers from SolarEdge and Tigo cannot be... more

The combination of Sungrow inverters and optimizers from SolarEdge and Tigo cannot be recommended according to current knowledge.
 

Accessories
Viewed