Favourable shipping conditions
More than 5000 satisfied installers
Expert knowledge and webinars
Hotline +49 89 9041015-00

Mounting systems

No results were found for the filter!
K2 lightning protection clamp multi alu 8mm set
K2 lightning protection clamp multi alu 8mm set Manufacturer: K2 Systems Type designation: 2002473 Order number: 6046

K2 Solar Cable Manager
K2 Solar Cable Manager Manufacturer: K2 Systems Type designation: 2002870 Order number: 6045

K2 MiniClamp MC silver
K2 MiniClamp MC silver Manufacturer: K2 Systems Type designation: 2002558 Order number: 6085

K2 MiniClamp EC silver
K2 MiniClamp EC silver Manufacturer: K2 Systems Type designation: 2002559 Order number: 6087

BOM Import
Order substructures quickly & easily
More Info

Upload your parts list from K2 Systems or the Alumero design tool, check the products & order with just a few clicks.

K2 MiniClamp MC, black
K2 MiniClamp MC, black Manufacturer: K2 Systems Type designation: 2002609 Order number: 6086

K2 MiniClamp EC, black
K2 MiniClamp EC, black Manufacturer: K2 Systems Type designation: 2002610 Order number: 6088

K2 TerraGrif PL
K2 TerraGrif PL Manufacturer: K2 Systems Type designation: 2004102 Order number: 6493

K2 D-Dome 6.10 base rail in set L
K2 D-Dome 6.10 base rail in set L Manufacturer: K2 Systems Type designation: 2004095 Order number: 6353

K2 Dome 6.10 Connector Bonding Set
K2 Dome 6.10 Connector Bonding Set Manufacturer: K2 Systems Type designation: 2004123 Order number: 6218

K2 SingleRail SpliceFoot
K2 SingleRail SpliceFoot Manufacturer: K2 Systems Type designation: 2003393 Order number: 9876

K2 Dome 6.10 Peak
K2 Dome 6.10 Peak Manufacturer: K2 Systems Type designation: 2004125 Order number: 6753

NEW
K2 Dome Zero Peak
K2 Dome Zero Peak Manufacturer: K2 Systems Type designation: 2003123 Order number: 10877

1 2

There is no solar module without a substructure! The right mounting system is the key component for a perfect support of a photovoltaic system. It is the link between the roof of the house and the modules. In the best case, your substructure will be barely visible but still reliable. To achieve this, you need to plan the construction in advance and calculate the wind and suction loads. Project-specific structural calculations can help you in this process.

Use the design programs to plan the substructure individually.

 
Viewed